Our touchscreen user interface provides an intuitive control panel, designed to make router operation simple. Beginning development in 1986, the Tekmov control system has been running and advancing with CNC technology for over 30 years.

Our routers are fit with durable Italian-made HSD 9kW spindles. Their robust design is capable of variable speeds up to 24,000 RPM. Resistant to high running temperatures, their internal ceramic bearings ensure long life and quiet operation.

When fitted to the spindle, this adapter enables your machine to steer both saw aggregates and regular router bits. A necessary component for any C axis saw machine. Three saw aggregates are included with this feature.

All Tekcel routers are equipped with an auto-tool change system, which can support up to 99 tools, and store up to 17 in the tool rack at any time. A time-efficient solution that supports the growing demands of industrial manufacturing.

Hands-off tool sensing measures your tool’s exact length – minimizing the chances of under or over-cutting. Toggle on for any tool bit to sense the tool’s length before its next use.

All axes are fit with a recirculating ball screw drive system. This eliminates the contact wear and backlash common with rack and pinion systems, delivering reliable accuracy and repeatability in position.

Smooth travel and a high level of accuracy are enhanced by linear rails on all four axes. Easy access grease points and recirculating balls inside these bearing blocks reduce wear over time.

AC servo motors work with our controller to constantly check their position and compensate for extra load while cutting. This closed feedback loop enables the controller to maintain cutting accuracy at all times.

Our routers are machined and welded with precision to ensure rigid construction – reducing vibration and allowing for finely tuned cut quality. Heat treating relieves internal stresses, assuring machining accuracy and stability.

We use proprietary aluminium extrusions, compatible with T- slot clamping systems and specially designed to withstand the stresses of our strong vacuum hold down. This, in combination with our precision-milled plastic top, creates a table with the flatness required for cut-to-mask applications.

Each table slat acts as a linear vacuum channel to hold down sheet material. Divert vacuum pressure to where it’s needed by opening or closing valves at the rear of the machine.

Representing the centre of the tool bit, the laser pointer can be used to set a unique job origin or preview the bounding box of a job. This pinpoint accuracy reduces the risk of error and ensures you get the most out of your material before you cut.

Each machine bed is fit with five pop-up pins, ensuring consistent registration every time. Choose to raise or lower the pins from the control screen during setup or begin cutting and the pins will drop automatically.

Unique to our S Series, our robust steel protective dust hood catches excess swarf and protects to the operator during cutting. The connected bristle dust foot reduces surface scratches, while extraction points on all four sides minimize clean-up between sheets.

By providing high volume dust extraction, this twin bag system is effective in clearing airborne swarf through large diameter hose. Paired specifically with our S Series, it works to collect cutting debris from under our wide clearance Steel Dust Hood.

Our durable, steel swing arm rotates with the machine, keeping the Z Axis extraction hose suspended during cutting. This clearance allows the machine to move freely across the bed preventing collisions with the hose.

Using a switch gear enables you to integrate a third party dust extractor into your machine system. Once set up, the dust extractor can be controlled through our user interface, with options for automatic or manual activation.

Connects to the vacuum exhaust to reduce noise levels during machine operation. We recommended adding a muffler when the machine is positioned in a busy work environment. Use alongside our Dust Extractor Muffler for extra noise reduction.

Unique to our S Series, our five-point coolant atomiser has been designed to ensure that adequate coolant is delivered to both the router bit and the saw in all configurations.

ProfileLab CAD/CAM software has been supplied with Tekcel routers for over 30 years. Training is included with each Tekcel machine, allowing you to create your own plot files, and personalize the tooling and materials library to streamline your workflow.

Specifically designed for CNC machining, ProfileLab 2D offers extensive 2D toolpathing capabilities without the extensive learning curve.

For more information, visit https://www.cadlink.com/product/profilelab-version-10-2d/.

Our tooling startup kit ensures you have everything you need to get you up and running on delivery. Each machine comes with a set of three tool holders, your choice of three tools with matching collets, one skimming bit and a cover nut spanner.

We provide a general safety and maintenance kit with every machine. This kit contains earmuffs, safety glasses, grease gun & coupler, grease cartridge, tool holder cleaning pad, CRC and shim plates for machine leveling.