The wireless pulse generator is used for fine origin adjustment. Wireless connection with the touchscreen control panel allows the operator to be next to the machine and closely observe as they make changes to the X, Y and Z origins.

Our surface probe allows you to cut to a consistent depth on uneven surfaces. Great for unique materials or fine engraving work. The system creates a map specific to your material and references this continuously while cutting to ensure accurate depth at all points.

Our high-pressure wet and dry dust extraction system ensures minimal cleanup after cutting. Integration into the router’s control system provides the ability to choose from manual or automatic operation. Includes an articulated arm and 10 meters of hose.

Our durable, steel swing arm rotates with the machine, keeping the Z Axis extraction hose suspended during cutting. This clearance allows the machine to move freely across the bed preventing collisions with the hose.

For use with our Tekcel Dust Extractor to reduce noise levels during machine operation. Recommended when the machine is positioned in a busy work environment. Use alongside our Vacuum Pump Muffler for extra noise reduction.

Using a switch gear enables you to integrate a third party dust extractor into your machine system. Once set up, the dust extractor can be controlled through our user interface, with options for automatic or manual activation.

Designed with thick, durable bristles this dust foot is great for routing metal, withstanding high heats that are produced while cutting. Extra space around the router bit aids in the clearing of larger chips while bristles prevent surface scratches and catch swarf before extraction.

Great for processing wood or deep 3D work across varying planes. Our long bristle dust foot is lined with soft bristles, measuring 40mm long. This curtain works to minimize cleanup by keeping the router bit and excess swarf concealed while cutting.

Each table slat acts as a linear vacuum channel to hold down sheet material. Divert vacuum pressure to where it’s needed by opening or closing valves at the rear of the machine.

Connects to the vacuum exhaust to reduce noise levels during machine operation. We recommended adding a muffler when the machine is positioned in a busy work environment. Use alongside our Dust Extractor Muffler for extra noise reduction.

Designed to use alongside our OptiCAM system for print and cut work. Our OptiCUT delivers the precision required for detailed knife work. Compatible with a variety of blades and capable of working with or without oscillation.

Note: OptiCUT cutting area is reduced by 170mm along the Y Axis.

Mounted beside the spindle, the OptiCAM reads printed registration marks on material and aligns plot files, making adjustments for stretch, shrinkage, or positioning. Includes ProfileLAB OptiLab module.

Designed for occasional use, our base coolant atomizer uses a 200mL reservoir suited to shorter jobs. A great option for those seeking a cost-effective solution for processing infrequent coolant work.

Our light curtain keeps one machine side open, while still providing protection during machine operation. Using a parallel transmitter and receiver, an invisible safety screen is powered up while cutting. If obstructed, the machine stops – protecting the operator from moving machinery.

For use when two open machine sides are preferred. Use alongside our standard Light Curtain to reflect the light screen to 90 degrees. Wrap the screen around the side of the machine without compromising the integrity of the system.

Mesh Barriers are used where the machine requires physical blocking. Barriers are made from 25mm x 25mm wire mesh. Height and width will be configured to your selected machine size and workshop requirements.