1-4 AXIS, 120 Watt/Axis DC Brush Servo CONTROLLER
Suitable for OEM or retrofits of light duty Profile Cutting machines including...
This controller is suitable for 1 - 4 axis machines which require up to 120 watts per axis motors. The 4 Axis servo amplifier is capable of supplying 3 amps, 40V to each of the 4 motors. The embedded firmware can be stored in an EPROM or Flash Programmable EEPROM. For profile cutting applications, it is used with TekMOV firmware and ProfileLAB CAD/CAM software.
For special purpose machines, the controller can be used with or without the Operator Interface, and firmware can be embedded in either eprom or flash eeprom. Custom programming for special applications is available by contacting Tommotek.
Chassis Mount Controller
This configuration is suitable for use with custom enclosure, or retrofits where existing enclosure is to be re-used.
This configuration is suitable for applications where Operator interface is located up to 3 meters away from the controller, and no additional auxiliaries have to be enclosed in the control box.
This configuration is suitable for applications where the Operator Interface is located up to 3 meters away from the controller, and some small auxilliaries such as pneumatic solenoids, etc. are to be housed in the control box.
This configuration is suitable where the Operator Interface is located either at the controller, or up to 3 meters.
There is enough room in the control box to house large auxlliaries such as frequency inverters, brake resistors, pneumatics etc.
|Operator Interface Options
|Operator Interface with Analog Joystick, and 4 x 40 Graphical LCD Screen
|Simple Operator Interface with Microswitch joystick and 2 x 20 LCD screen
|For Special Puropose machines, Hyperterm or similar RS232 based Comms package.
|Various Sizes of DC Brush Motors,with or without Reduction Gearbox, up to 3 Amps 40 volts continuous rating. Consult factory for your application.